Suspended Bio Filler Ball With Different Filler Inside As Microbial
Carrier
Product Description
This filler is a round sphere injection-molded with PP material,
which is divided into inner and outer double layers, the outside is
a hollow fishnet-shaped sphere, and the inside is combined filler.
The product has a full three-dimensional structure, which can be
directly placed without fixing. It has a large specific surface
area, easy to hang on the film, and does not block. The all-plastic
structure has aerobic function, easy to generate microorganisms,
easy to replace, acid and alkali resistant, anti-aging and not
affected by water flow , Long service life, minimal residual
sludge, easy installation.
Technology Parameter
| Specific | Struction | Stacking factor |
| 80mm | Spherical | 2000n/m3 |
| 100mm | Spherical | 1000n/m3 |
| 150mm | Spherical | 560n/m3 |
Product Advantage
1. Large specific surface area
Using an internal hollow structure, with multiple grooves and
grids, greatly increasing the specific surface area of the filler.
2. The reaction form is good
The filler is in a fluidized state in the reactor, the reaction
form is completely mixed, and the reactor filler is fully mixed
with gas and water. In the fluidized state, the aging biofilm can
automatically fall off by hydraulic flushing, which promotes
biofilm regeneration.
3. High oxygen utilization rate
Through the separation of the filler and the constant contact of
the filler with water and airflow, the utilization rate of oxygen
can be greatly improved.
Product Application
It is suitable for treating domestic wastewater, petrochemical
industry, light industry papermaking, food industry, wine making,
sugar making, textile, printing and dyeing, tanning, pharmaceutical
and other industrial wastewater treatment. The amount of spherical
filler is 1: 1000 per m3 of treated water, which depends on the
concentration of water quality.
